Skip to content
Dev
Flynn's Engineering 0491 570 156

Precision parts for industry and rail, made to your drawing.

CNC machining and fabrication for industrial and rail customers, from a single prototype to full production runs.

  • CNC turning and milling
  • Fabrication and welding
  • Prototypes to production runs

Demo model

Call 0491 570 156 Demo Send a drawing or a photo of the part, by email Demo address

Materials machined

Steels

The bulk of the work. Bar and plate in common grades are usually on hand or a day away.

Demo content

ISO group P
Grades Mild steel, 1020, 1045, 4140, 4340, EN36A
Typical work Shafts, pins, bushes, axle and coupling parts, brackets, flanges

Stainless steels

Turned and milled with the right tooling so it does not work-harden on the way through.

Demo content

ISO group M
Grades 303, 304, 316, 431, 2205 duplex
Typical work Pump shafts, valve parts, fittings, food-grade and washdown components

Cast irons

Worn or cracked castings can often be re-bored and sleeved instead of replaced.

Demo content

ISO group K
Grades Grey iron, SG (ductile) iron, continuous-cast bar
Typical work Housings, bearing caps, pulleys, wear plates, re-machined castings

Non-ferrous and plastics

Bronze bushes, manifolds and plastic wear parts, one-off or in batches.

Demo content

ISO group N
Grades Aluminium 6061 and 7075, brass, bronze (LG2, PB1), acetal, nylon, UHMWPE
Typical work Bushes, bearings, manifolds, guards, spacers, wear pads

Heat-resistant alloys

Taken on by arrangement. Ring first so material and tooling can be lined up.

Demo content

ISO group S
Grades Titanium Grade 2 and Grade 5, Inconel 625 and 718 by arrangement
Typical work Small high-temperature and corrosion-resistant parts

Hardened steels

Hard turning saves sending a part out for grinding when the tolerance allows it.

Demo content

ISO group H
Grades Hardened and tempered steels to 55 HRC, bisalloy plate
Typical work Hard-turned pins and sleeves, wear parts, reworked hardened components

What fits on the machines

If your part is inside these envelopes it can be made here. If it is close, get in touch.

CNC turning Demo

D L d
D Swing over bed Ø400 mm
L Between centres 1000 mm
d Bar through spindle Ø65 mm

CNC milling Demo

X Y Z
X Table travel 1020 mm
Y Cross travel 510 mm
Z Vertical travel 510 mm
A milled aluminium plate with pockets, bores and channels

Ra 0.8 µm finest surface finish Demo

Stock photo

Tolerances and the rest Demo

General tolerance ±0.05 mm
Close tolerance ±0.01 mm
Surface finish to Ra 0.8 µm
Threads Metric, UN, BSP, ACME
Batch size Prototype to production quantities
Fabrication MIG and TIG welding, cut and drill
Also on the floor Manual lathe and mill for repairs

How a job runs

A clear quote, an agreed date, and every part checked against your drawing before it ships.

  1. Ring, or send the drawing

    A drawing, a sketch with sizes, or a photo of the broken part next to a tape measure.

    Today Demo

  2. Get a straight answer

    Whether it can be made, what it costs and when it will be ready.

    Same day Demo

  3. The part gets made

    Machined and checked to the agreed drawing. You hear straight away if anything changes.

    To the agreed date Demo

  4. Pick up or freight

    Collect from the workshop, or it goes out by courier to site.

    When ready Demo

Said about the work

“Drawings went out on Monday and the parts came back on the date we were given, measured and right first time.”
Procurement officer, rail Demo quote
“Clear quotes, sensible lead times and parts that fit. That is all we ask of a supplier.”
Workshop manager, industrial Demo quote

Parts made for

  • [Client logo]
  • [Client logo]
  • [Client logo]
  • [Client logo]

Approvals

  • [Accreditation placeholder]
  • [Accreditation placeholder]
  • [Accreditation placeholder]

Have a part or project to quote?

Send the drawing or call to talk it through. You get a clear price and lead time back. Demo number

0491 570 156
Send a drawing Demo address
drawings@flynnsengineering.example
Workshop
[Workshop address]
Hours
[Opening hours]