Skip to content
Dev
Flynn’s Engineering Call 0491 570 156
Menu

Precision machined parts, made to your drawing.

Flynn’s is a CNC machine shop for industrial and rail. Turned, milled and fabricated parts from prototype to production, with urgent breakdown work turned around fast.

Call 0491 570 156 Send a drawing

Demo number and address Stock photo

  • Turning, milling and fabrication
  • Prototype to production
  • Urgent breakdown work

What gets made here

If your part is inside these sizes it can be made here. If it is close, ring and ask. Demo figures

CNC turning

Shafts, pins, bushes and sleeves, turned from bar or from your worn sample.

Swing over bed
Ø400 mm
Between centres
1000 mm
Bar through spindle
Ø65 mm

Demo figures

CNC milling

Brackets, plates, housings and manifolds, milled from billet or plate.

Table travel
1020 mm
Cross travel
510 mm
Vertical travel
510 mm

Demo figures

Fabrication and repairs

Welded assemblies, and worn or broken parts built up and re-machined.

Welding
MIG and TIG
Cutting
Cut and drill
Repairs
Manual lathe and mill

Demo figures

Materials machined

Grouped the way tooling is: by ISO material class. Demo content

  • Steels

    Mild steel, 1020, 1045, 4140, 4340, EN36A

  • Stainless steels

    303, 304, 316, 431, 2205 duplex

  • Cast irons

    Grey iron, SG (ductile) iron, continuous-cast bar

  • Non-ferrous and plastics

    Aluminium 6061 and 7075, brass, bronze (LG2, PB1), acetal, nylon, UHMWPE

  • Heat-resistant alloys

    Titanium Grade 2 and Grade 5, Inconel 625 and 718 by arrangement

  • Hardened steels

    Hardened and tempered steels to 55 HRC, bisalloy plate

A milled aluminium plate with pockets, bores and channels
Stock photo

Held to the drawing

Every part is set up from your drawing and measured against it before it leaves the workshop. Demo figures

General tolerance
±0.05 mm
Close tolerance
±0.01 mm
Surface finish
to Ra 0.8 µm
Threads
Metric, UN, BSP, ACME
Batch size
1 off to 200

How a job runs

From the first call to the finished part, you get a straight answer on price and timing at every step.

  1. Ring, or send the drawing

    A drawing, a sketch with sizes, or a photo of the broken part next to a tape measure.

    Today Demo

  2. Get a straight answer

    Whether it can be made, what it costs and when it will be ready.

    Same day Demo

  3. The part gets made

    Urgent breakdown work goes to the front. You hear straight away if anything changes.

    From 24 hours Demo

  4. Pick up or freight

    Collect from the workshop, or it goes out by courier to site.

    When ready Demo

What customers say

“We had a wagon stood down for one pin. It was drawn up from the worn sample and back on site the next afternoon.”
Maintenance supervisor, rail Demo quote
“Three shops told us it was too small a job to bother with. This one just got on and made it.”
Workshop manager, industrial Demo quote

Parts made for

  • [Client logo]
  • [Client logo]
  • [Client logo]
  • [Client logo]

Approvals

  • [Accreditation placeholder]
  • [Accreditation placeholder]
  • [Accreditation placeholder]

Part down? Ring Flynn’s.

You will be talking to someone who knows machining, so you get a real answer on the first call.

0491 570 156 Send a drawing Demo number and address